Course 006 Module — Harvest, Postharvest, Traceability & Handoff Check
Complete each item before opening the answer panel. Use missed rationales to return to the matching lesson.
1. What should happen when harvest conditions become unsafe after the task has started?
- Reassess and apply authorized control or stop/escalate before continuing
- Continue because startup was approved
- Wait for injury evidence
- Use speed as the control
Check answer and rationale
Answer: A. Reassess and apply authorized control or stop/escalate before continuing
Reassess and apply authorized control or stop/escalate before continuing. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
2. The harvest route is blocked by an unnecessary cart. What is the correct routine response when procedure permits?
- Climb over it
- Move the cart to the approved location and verify the route is clear
- Leave it for the next shift
- Ignore the route requirement
Check answer and rationale
Answer: B. Move the cart to the approved location and verify the route is clear
Move the cart to the approved location and verify the route is clear. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
3. What is the strongest description of drying?
- A fixed number of days
- The same as storage
- A controlled moisture-removal process monitored with material and environmental context
- A process finished when the outer surface feels dry
Check answer and rationale
Answer: C. A controlled moisture-removal process monitored with material and environmental context
A controlled moisture-removal process monitored with material and environmental context. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
4. One rack differs from adjacent racks in product condition. What should be documented?
- The whole room as failed
- Only cultivar name
- Nothing until packaging
- The identified rack/lot and relevant process/environment evidence before making a broader conclusion
Check answer and rationale
Answer: D. The identified rack/lot and relevant process/environment evidence before making a broader conclusion
The identified rack/lot and relevant process/environment evidence before making a broader conclusion. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
5. Why should a harvest output identifier be linked to its source?
- So the postharvest lot genealogy remains reconstructable through the transformation
- To reduce label printing
- To replace the old history
- To avoid recording quantity
Check answer and rationale
Answer: A. So the postharvest lot genealogy remains reconstructable through the transformation
So the postharvest lot genealogy remains reconstructable through the transformation. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
6. A new container label exists but no record links it to the source batch. What is the issue?
- No issue because the label is new
- The genealogy is broken even though the output has a label
- Only the dry-room location matters
- The source can be inferred from appearance
Check answer and rationale
Answer: B. The genealogy is broken even though the output has a label
The genealogy is broken even though the output has a label. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
7. What should happen to suspect material during normal receiving?
- Blend it with clean material
- Remove the hold label
- Keep it under the supplied hold/isolation control until authorized review or release
- Dispose of it without authorization
Check answer and rationale
Answer: C. Keep it under the supplied hold/isolation control until authorized review or release
Keep it under the supplied hold/isolation control until authorized review or release. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
8. A dirty receiving rack is discovered. What is the correct principle?
- Use it because the lot will dry
- Receive first and clean later
- Cover it with another lot
- Correct or isolate the sanitation problem through procedure before harvested material contacts the rack
Check answer and rationale
Answer: D. Correct or isolate the sanitation problem through procedure before harvested material contacts the rack
Correct or isolate the sanitation problem through procedure before harvested material contacts the rack. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
9. What should happen when the destination in the work order cannot be used?
- Pause the affected transfer and obtain an authorized destination rather than improvising
- Choose any empty rack
- Stage material without identity
- Delete the destination requirement
Check answer and rationale
Answer: A. Pause the affected transfer and obtain an authorized destination rather than improvising
Pause the affected transfer and obtain an authorized destination rather than improvising. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
10. A hold is still active but someone asks for release without controlled approval. What should Technician I do?
- Release it verbally
- Maintain the hold and resolve release authority through the supplied process
- Remove the record
- Move it into normal flow temporarily
Check answer and rationale
Answer: B. Maintain the hold and resolve release authority through the supplied process
Maintain the hold and resolve release authority through the supplied process. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
11. What should happen when outgoing and receiving weights do not agree?
- Change the lower value
- Average them
- Preserve both results and use the controlled reconciliation process
- Delete one record
Check answer and rationale
Answer: C. Preserve both results and use the controlled reconciliation process
Preserve both results and use the controlled reconciliation process. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.
12. One container remains held at shift end. What belongs in the handoff?
- Harvest complete
- No note until release
- Only the cultivar name
- Its identity/location, hold reason/evidence, actions, notification and required follow-up
Check answer and rationale
Answer: D. Its identity/location, hold reason/evidence, actions, notification and required follow-up
Its identity/location, hold reason/evidence, actions, notification and required follow-up. This preserves the Course 006 safety, postharvest, traceability, contamination-control, authority or record-quality principle being assessed.